PANEL MAX 2 x 15 dBi antenna 2.6 GHz LTE

Untitled Document

The antenna is designed for use in areas where the level of LTE signal is too low for proper performance of voice and data transmission via modem. LTE antenna PANEL MAX allows you to significantly strengthen the radio signal used to carry out the transmission in MIMO LTE 5G. The use of an antenna connected to a modem, can significantly increase the transmission speed by increasing the level of the signal and changes its modulation. The antenna was made in microstrip technology with high quality materials, fully resistant to weather conditions (humidity, wind, UV radiation). Antenna PANEL MAX has an advanced fastening system that allows the correction of both azimuth and antenna horizon.

WARNING! In cooperation with the LTE networks, antenna should be placed indiagonally polarized + 45 / -45 and at the same time.

Also check: LTE pigtails antenna-modem

Antenna is compatibile with European LTE networks:
A1 Telekom Austria, T-Mobile Austria, TeliaSonera, TDC, EMT, ELISA, TeliaSonera, Omnitel, Telenor, Tele2

Technical specification:

Model	BP-26PL-15-MIMO
Gain	15 dBi
Frequency	2500 - 2690 MHz
Horizontal beam width	30 degrees
Vertical beam width	32 degrees
Impedance	50 Ohm
Connector	2 x N (f) socket
VSWR	1.4
Dimensions	304.8 / 304.8 / 38.1 mm
Weight	2.27 kg
Polarization	vertical or horizontal (both)
Standard	Full compatibility with LTE MIMO
Mounting	Mast handle, diameter from 1/2 to 7/4 inch (allows full rotation and azimuth correction).
Wind load	frontal: 163 N (at 125 mph) rearside: 148 N (at 125 mph) lateral: 13 N (at 125 mph)

Radiation patterns:


Azimuth H	Elevation H

Azimuth V	Elevation V

PANEL MAX 2 x 15 dBi antenna 2.6 GHz LTE